Soft Power Line
The Soft line with extended electronics: it takes a pod loader so jobs can be chained.
SOFT POWER LINE · CNC
Dental Four DF200
The compact one that takes a pod loader
A lab entry point with pneumatic pod release: pause a job, change material and pick it up where it left off. The manufacturer classes it separately, as E-Soft Power Line, for its extended electronics.
Materials: Technopolymers, Resins, Zirconia, Fibres, Disilicates
Applications: crowns, anatomical crowns, screw-retained crowns, bridges and anatomical bridges, screw-retained bridges, inlays and onlays, occlusal splints and bites, surgical guides
- 100.000 rpm
- spindle speed
- 750 W
- spindle power
- 22
- tool positions
Why the DF200 with Z-Printer.
Jäger spindle, 750 W
Frequency-driven to 100.000 rpm, with a 3 mm tool shank.
22 tools without touching the machine
An automatic 22-position tool changer, with breakage detection and automatic recovery using an alternative tool.
Ready for a 4-pod loader
With the optional loader it chains up to 48 hours of unattended work.
Engineered with the best technology.
Hand-built in Bobbio, with the mechanics and cooling its spec sheet declares.
Mechanics
Cartesian movement on ground screws and lifetime-lubricated recirculating ball bushings. A axis on a zero-backlash harmonic reducer; B axis on a class p0 epicyclic reducer.
Dry milling
With an optional lubrication kit to work wet as well.
Materials
From technopolymers to disilicates: from the single crown to the surgical guide.
Motors
Stepper with encoder, for maximum precision.
CAM software and an open workflow.
An open system: the DF200 works with the main dental CAM packages on the market. The certified strategy pack, by material and thickness, is included, so the machine produces from day one without depending on proprietary software.
- Certified strategy pack
- Works with the main CAM packages on the market
- Open system, no format lock-in
Materials.
The materials the manufacturer declares for the DF200.
Technopolymers
Resins
Zirconia
Fibres
Disilicates
Applications.
From the single crown to the surgical guide.
Crowns
Anatomical crowns
Screw-retained crowns
Bridges and anatomical bridges
Screw-retained bridges
Inlays and onlays
Occlusal splints and bites
Surgical guides
Available options.
Configure your DF200 for the best performance in your lab.
Automatic 4-pod loader
Chains the cycle across four holders: up to 48 hours of unattended work.
Lubrication and extraction kit
For wet milling: coolant pump, filtration and extraction.
Support table on castors
Houses the filtration system tidily under the machine.
C-Clamp pod holder
An open holder: it lets the disc be milled at 90° to reach the buccal area.
Self-calibration with probe
An electronic probe checks the disc position and corrects the calibration.
Spec sheet.
Key technical data for the Dental Four DF200.
- Milling system
- 5 continuous axes
- Spindle
- Jäger, frequency-driven · 750 W · 100.000 rpm
- Tool shank
- 3 mm
- Tool changer
- Automatic, 22 positions
- Motors
- Stepper with encoder
- Axis rotation
- A = 360° · B = ±40°
- Lubrication
- Optional
- Power supply
- 230 V ca · 1.900 W · aire a 5 bar · 50 l/min
- Dimensions
- 720 × 650 × 740 mm (width × depth × height)
- Weight
- 115 kg
- Product line
- Soft Power Line
Data from the manufacturer's spec sheet. Subject to change without notice.
Ready for your lab?
We will help you size the installation, the tooling cost and the return on investment before you buy.