Soft Power Line
The soft-materials line: speed to produce volume in resin, PMMA and zirconia.
SOFT POWER LINE · CNC
Dental Four DF500
Soft material, around the clock
Speed and sturdiness for volume production, with pneumatic pod release as standard and a four-pod loader for 48 unattended hours.
Materials: Technopolymers, Resins, Zirconia, Fibres, Disilicates
Applications: crowns, anatomical crowns, screw-retained crowns, bridges and anatomical bridges, screw-retained bridges, inlays and onlays, occlusal splints and bites, surgical guides
- 100.000 rpm
- spindle speed
- 750 W
- spindle power
- 22
- tool positions
Why the DF500 with Z-Printer.
Jäger spindle, 750 W
Frequency-driven to 100.000 rpm, with a 3 mm tool shank.
22 tools without touching the machine
An automatic 22-position tool changer, with breakage detection and automatic recovery using an alternative tool.
Ready for a 4-pod loader
With the optional loader it chains up to 48 hours of unattended work.
Engineered with the best technology.
Hand-built in Bobbio, with the mechanics and cooling its spec sheet declares.
Mechanics
Cartesian movement on ground screws and lifetime-lubricated recirculating ball bushings. A axis on a zero-backlash harmonic reducer; B axis on a class p0 epicyclic reducer.
Dry milling
With an optional lubrication kit to work wet as well.
Materials
From technopolymers to disilicates: from the single crown to the surgical guide.
Motors
Brushless with 23-bit absolute encoders.
CAM software and an open workflow.
An open system: the DF500 works with the main dental CAM packages on the market. The certified strategy pack, by material and thickness, is included, so the machine produces from day one without depending on proprietary software.
- Certified strategy pack
- Works with the main CAM packages on the market
- Open system, no format lock-in
Materials.
The materials the manufacturer declares for the DF500.
Technopolymers
Resins
Zirconia
Fibres
Disilicates
Applications.
From the single crown to the surgical guide.
Crowns
Anatomical crowns
Screw-retained crowns
Bridges and anatomical bridges
Screw-retained bridges
Inlays and onlays
Occlusal splints and bites
Surgical guides
Available options.
Configure your DF500 for the best performance in your lab.
Automatic 4-pod loader
Chains the cycle across four holders: up to 48 hours of unattended work.
Lubrication and extraction kit
For wet milling: coolant pump, filtration and extraction.
Support table on castors
Houses the filtration system tidily under the machine.
C-Clamp pod holder
An open holder: it lets the disc be milled at 90° to reach the buccal area.
Self-calibration with probe
An electronic probe checks the disc position and corrects the calibration.
Telegram monitoring
A camera inside the milling chamber: the job is followed from your phone.
Spec sheet.
Key technical data for the Dental Four DF500.
- Milling system
- 5 continuous axes
- Spindle
- Jäger, frequency-driven · 750 W · 100.000 rpm
- Tool shank
- 3 mm
- Tool changer
- Automatic, 22 positions
- Motors
- Brushless with 23-bit absolute encoders
- Axis rotation
- A = 360° · B = ±40°
- Lubrication
- Optional
- Power supply
- 230 V ca · 1.900 W · aire a 5 bar · 50 l/min
- Dimensions
- 845 × 720 × 835 mm (width × depth × height)
- Weight
- 200 kg
- Product line
- Soft Power Line
Data from the manufacturer's spec sheet. Subject to change without notice.
Ready for your lab?
We will help you size the installation, the tooling cost and the return on investment before you buy.