Wet and dry milling
One machine for aesthetics dry and for metal wet.
WET AND DRY · CNC
Jiny JDM5Z Robot
Compact, wet and dry
148 kg and under 70 cm deep, with an air-cooled spindle and both milling modes.
Materials: Glass ceramics, Premilled abutments, Zirconia, PMMA, PEEK, Wax
Applications: copings and full crowns, three-unit bridges, inlays and onlays, veneers, screw-retained crowns, custom abutments, bars, partial denture frameworks, superstructures over bars, full dentures, bite splints
- 60.000 rpm
- of spindle speed
- 8
- tool positions
- 148 kg
- in weight
Why the JDM5Z Robot with Z-Printer.
0,5 kW spindle
Up to 3.000 – 60.000 rpm, cooling: por aire.
8 tools
An automatic changer: it chains burs without anyone opening the machine.
Genuinely compact
Under 70 cm deep and 148 kg: it fits where a bed-type machine does not.
The mechanics.
What the manufacturer's sheet declares.
Axes
5 continuos
Milling angles
A ±360° · B ±30°
Materials.
The materials the manufacturer declares for the JDM5Z Robot.
Glass ceramics
Premilled abutments
Zirconia
PMMA
PEEK
Wax
Applications.
From the coping to the full denture.
Copings and full crowns
Three-unit bridges
Inlays and onlays
Veneers
Screw-retained crowns
Custom abutments
Bars
Partial denture frameworks
Superstructures over bars
Full dentures
Bite splints
Spec sheet.
Key technical data for the Jiny JDM5Z Robot.
- Axes
- 5 continuos
- Milling angles
- A ±360° · B ±30°
- Spindle
- 0,5 kW
- Maximum speed
- 3.000 – 60.000 rpm
- Spindle cooling
- Por aire
- Tool changer
- Automatic, 8 positions
- Milling mode
- Wet and dry milling
- Materials
- Glass ceramics, Premilled abutments, Zirconia, PMMA, PEEK, Wax
- Power supply
- 220 V · 1,2 kW
- Dimensions
- 752 × 470 × 690 mm
- Weight
- 148 kg
Data from the manufacturer's spec sheet. Subject to change without notice.
Ready for your lab?
We will help you size the installation, the tooling cost and the return on investment before you buy.