SLM, selective laser melting
Metal is fused layer by layer in a controlled atmosphere: solid-part density, with no casting and no roughing pass.
SLM · DENTAL
Fast Form FF-M140C
The step up to metal, in dental
A 500 W laser and 150 teeth per platform, with layout and data prepared in five minutes and no filter cartridge to replace.
Materials: Cobalt-chrome, Ti6Al4V titanium, Pure titanium
Applications: crowns, bridges, metal frameworks, removable frameworks, implant bars
- 500 W
- of laser
- 140 mm
- of platform
- 150
- teeth per platform
Why the FF-M140C with Z-Printer.
Laser: 1 × fibra 500 W
A fibre source with galvanometer scanning at 0 – 10 m/s.
Filtration
Sin cartucho: aprovechamiento alto del polvo. Less consumable, less downtime and less cost per part.
Five minutes to prepare a job
Parts are laid out and paths calculated automatically, without anyone having to learn a manufacturing package.
Additive metal manufacturing, with nobody in between.
What the manufacturer's sheet declares, unembellished.
Build volume
Ø 140 × 170 mm
Layer thickness
20 – 120 µm (ajustable)
Spot size
50 – 100 µm (ajustable)
Dimensional accuracy
±0,1 mm (L ≤ 100 mm); ±0,1 % × L (L > 100 mm)
In-house software, from part to plate.
The FF-M140C ships with Fast Form's preparation and control software: it lays out the parts and works out the paths automatically, with a database of validated parameters by material, and logs every print.
- Automatic layout and path planning
- Validated parameters by material
- Takes STEP, IGES, SLC, CLI and STL
- Print log for traceability
Materials.
The materials the manufacturer declares for the FF-M140C.
Cobalt-chrome
Ti6Al4V titanium
Pure titanium
Applications.
From the single crown to the implant bar.
Crowns
Bridges
Metal frameworks
Removable frameworks
Implant bars
Ancillary equipment.
The printer is one part of the workflow. This is what goes with it in a lab that produces.
Nitrogen generator
Makes the process gas on site, with no dependence on cylinders.
Explosion-proof vacuum
Collects the metal powder with the safety a reactive material demands.
Powder sieving machine
Recovers unfused powder and returns it to the cycle, graded.
Heat treatment furnace
Relieves stress and gives the material its final properties.
Spec sheet.
Key technical data for the Fast Form FF-M140C.
- Technology
- SLM (selective laser melting)
- Lasers
- 1 × fibra 500 W
- Build volume
- Ø 140 × 170 mm
- Layer thickness
- 20 – 120 µm (ajustable)
- Spot size
- 50 – 100 µm (ajustable)
- Scanning speed
- 0 – 10 m/s
- Dimensional accuracy
- ±0,1 mm (L ≤ 100 mm); ±0,1 % × L (L > 100 mm)
- Materials
- Cobalt-chrome, Ti6Al4V titanium, Pure titanium
- Atmosphere
- Nitrógeno o argón · O₂ ≤ 100 ppm
- Filtration
- Sin cartucho: aprovechamiento alto del polvo
- Cooling
- Por agua
- Power supply
- 220 V monofásico · 1,5 kW de consumo medio
- Dimensions
- 970 × 815 × 1.750 mm (L × D × H)
Data from the manufacturer's spec sheet. Subject to change without notice.
Ready for your lab?
We will help you size the installation, the process gas and the ancillary equipment before you buy.